You can trust PC Guide:Our team of experts use a combination of independent consumer research, in-depth testing where appropriate - which will be flagged as such, and market analysis when recommending products, software and services. Find out how we test here.
If you’ve got a new GE Universal remote and are wondering how to set it up and where to get the remote codes, we have you covered right here.
Now, whether you want to replace your original remote or operate multiple devices with a single remote, the GE Universal remote comes in handy. All you have to do is find the right codes and program the remote for one or multiple devices (up to three).
Technically, there are two ways to program a GE Universal remote: one by using the remote codes and the other by using the auto code search. You don’t necessarily need to have codes to set your remote. But without codes, you may have torepeat the process multiple times, which might be time-consuming.
With that being said, in this guide, we have outlined both – how to program the GE Universal remote with and without the codes.
✓
Quick Answer
To use your GE universal remote, you have to program it. For this, you need the right remote code, which we have listed below in a chart. Then, you need to pair it with the device (TV, DVD, sound bar, or other compatible device).
Here’s a quick rundown (with codes) –
Find the code > switch on programming mode > press the appropriate button > enter the device code > check if it’s working.
You can also try to program your GE Universal Remote without codes. For more details, check out our guide below.
How to program GE Universal Remote
This is the easiest way to set up your remote is to enter the code manually and get started. Here’s how to do that –
Step
1
Find the code for your device
To start with, you need to find the specific code, depending on your device’s brand and model. You will find this code in the GE Remote Manual, the official website, or the universal code list.
Step
2
Turn on the programming mode
Next, you have to turn on the programming mode on the remote. For this, you need to press and hold the “setup” button until you see a red light.
Step
3
Press the corresponding button
After you see the red light, you have to select the button of the device you want to use the remote with. For instance, if you want to use the GE remote with a TV, then press the ‘TV’ button. After the selection, the remote might blink once.
Step
4
Input the device code
After the remote blinks, input the device code that we found in step 1. Once you enter the code, the remote will turn off.
Step
5
Check if the remote works
To see if the programming was done correctly, point the remote at the device and try turning it on and using other buttons. If the device doesn’t respond, try this procedure again with a different code.
How to program GE Universal Remote without codes
If you don’t have the remote codes, you can still pair the GE Universal Remote with the device. However, note that this process may be time-consuming and may vary slightly depending on the remote you have.
Here’s how to do that –
Step
1
Power on the device
The first step is to turn your desired device on (that is, the TV, the DVD, or other device).
Step
2
Turn the remote’s programming mode on
Next, you have to put the GE Universal Remote in the programming mode. To do this, press and hold the ‘setup’ button until you see a light.
Step
3
Select the device you want to pair
When you see the light, select the device you want to set up by pressing the corresponding button. For instance, if you want to set up this remote with your TV, then press the ‘TV’ button on the remote. The red light should blink once, indicating that the device has been selected.
Step
4
Point at your device and press the right button
Now, point the remote at your selected device and press the power button. For TVs, press the power button, and for DVDs, press the ‘play’ button.
Step
5
Press the #1 button quickly
Now, you have to lock in the code quickly, so be prepared – find and place your finger on the #1 button. When the device (TV) turns off, or the DVD player start playing, press the #1 to lock the code.
Step
6
Check if the remote works
Now, point the remote at the device, turn it on, and see if it works properly. If the remote is working fine, you don’t need to program it more. However, if it is not working correctly, you will have to repeat the process from step 2.
Code list for GE Universal Remote
In this section, we have listed some of the most common codes for programming your GE Universal Remote. Please note that this is not a complete list, we have listed codes for some of the popular brands. You can find link to the full list below.
GE Universal remote codes for TV
| Brand | Remote codes |
| LG | 6021, 0001, 5511, 3001, 1911, 1181, 1221 |
| Hisense | 6161, 1651, 2081, 5331, 2211, 2141, 6171, 5341, 0001, 0671, 4391 |
| Sony | 1071, 5811, 5321, 4981, 1901, 2741 |
| Insignia | 2891, 0371, 2271, 0141, 6171, 0581, 0871, 0921, 2241, 6181, 2921, 3761, 4371, 4721, 4761, 5051, 5061, 5181 |
| Sharp | 5341, 6001, 6011, 3191, 5941, 6171, 0001 |
| Toshiba | 1311, 5531, 1121, 2691, 0211, 0341, 0821, 1571, 1801, 1841, 1911, 4891, 4941, 5081 |
| Samsung | 5791, 5801, 3301 |
| Panasonic | 6231, 5821, 5201, 5531, 1571, 5561, 5201 |
| Philips | 0181, 6221, 5741, 6051, 0201, 0911, 3981, 4261 |
| TCL | 5961, 6031, 5771, 6171, 6201 |
| ONN | 5961, 6431, 6171, 6551 |
Please note that the codes are different for those of Hisense Roku TV or Toshiba Fire TV.
GE Universal remote codes for DVD
| Brand | Remote codes |
| Bose | 6170 |
| Philips | 6002, 6008, 6019, 6022, 6046, 6084, 6085, 6123, 6134, 6139, 6167, 6168, 6228, 6238, 6239, 6240, 6285, 6306, 6489, 6545, 6549 |
| Panasonic | 6001, 6002, 6011, 6026, 6090, 6096, 6097, 6103, 6113, 6121, 6216, 6229, 6233, 6471, 6490, 6520, 6544, 6557 |
| Sony | 6006, 6049, 6095, 6099, 6115, 6124, 6243, 6244, 6245, 6246, 6473, 6487, 6537, 6538, 6543 |
| Samsung | 6001, 6012, 6032, 6055, 6066, 6129, 6165, 6166, 6210, 6287, 6478, 6479, 6488, 6498 |
| HP | 6486 |
| Mitsubishi | 6003, 6098, 6126, 6485 |
| Toshiba | 6002, 6008, 6012, 6025, 6061, 6076, 6123, 6232, 6295, 6301, 6373, 6475, 6515, 6516, 6525, 6542 |
GE Universal remote codes for cable box/ satellite
| Brand | Remote codes |
| AT&T | 8088, 8206 |
| Century | 8003, 8016, 8056, 8113 |
| Dish | 8041, 8045, 8148, 8149, 8191, 8193, 8204 |
| DirecTV | 8018, 8021, 8023, 8024, 8028, 8034, 8035, 8039, 8040, 8042, 8043, 8044, 8046, 8063, 8109, 8110, 8111, 8139, 8153, 8172, 8178, 8179, 8181, 8184, 8185, 8196, 8199, 8201, 8202, 8203 |
| Comcast | 8088 |
| Charter | 8027 |
| Cogeco | 8088 |
| Sky Network | 8029, 8109, 8110, 8111, 8170, 8171 |
| ABC | 8002, 8003, 8014, 8048, 8049, 8050, 8051, 8052 |
| RCA | 8018, 8195, 8213, 8214 |
GE Universal remote codes for Xbox
If you are trying to set up the remote or your Xbox, then you can try the following codes –
- As DVD – 0915
- As a streaming media player – 2824, 2134, 2144
For more codes, we encourage you to check out the official GE Universal remote user manual right here.
Frequently Asked Questions
Can you program the GE Universal Remote without a code?
Yes, you can set up your GE Universal Remote without codes by using the auto-code search. All you have to do is – lock in when the right code is selected. However, you might have to repeat this process several times before the remote is properly programmed. For details, you can refer to our guide above.
What brands does GE Universal remote work with?
The GE Universal remote works with most brands, which includes popular brands such as LG, Sony, HP, Panasonic, Vizio, Insignia, Crown, Hyundai, and more. You should be able to program this remote with most brands.
Conclusion
To sum up, you can set up your GE Universal remote with or without codes. However, we recommend you find and use the codes, as it is a quicker and more straightforward process. To make it easier for you, we have listed some of the common codes along with guides on how to set up the GE Universal remote.
